Fender Deluxe Telecaster+NEW EMG-X Active Pickups - Quiet Operation Anywhere !

Brand: Fender Telecaster+EMG Active Pickups
;Series: American-Haywire Custom Guitars Modified
;Model: Telecaster American Deluxe body in Natural Butters
;Instrument: Fender Electric Guitar Modified by Haywire Shop
;MPN: none does not apply
;Type: Fender Telecaster +Contoured back
;Body Type: Solid
;Hand: Right
;String Configuration: 6 String
;Telcaster Haywire Customized: Haywire Custom Guitar Shop Modified Telecaster
;Body Color: Natural maple
;Haywire Custom Guitars Inc.: 1-843-347-5742 call for more guitar info
;Body Material: Maple, Solid Wood
;Country/Region of Manufacture: United States
;Country of Manufacture: United States of America
;Dexterity: Right-Handed
;Style: Custom Shop Modified Deluxe Tele+ Barden in Body
;Model Year: 2014
;UPC: Does not apply

Fender Deluxe Telecaster+NEW EMG-X Active Pickups - Quiet Operation Anywhere !

Instruments for Professionals We Ship World Wide!

 Custom Shop

 Fender Maple Deluxe

  25-1/2" Scale

Telecaster with Gloss finish + Rosewood Neck

Loaded with: 

2 (Two)-Emg Active RT-X Gold Label Pickups

X-Series

Neck and Bridge

pickups for:

Quiet Operation Anywhere:

 live or studio gigs-no buzz or hum!!

+
Black Pick Guard 

and

 3 Way Switching  with 6 Saddle String-through body bridge

Maple/Rosewood Fender Neck with 9-42 Ernie Ball strings installed

The EMG RTX is a new take on the classic Telecasters™ pickup. Don't let the looks fool you, the RTX gives you all the twang and punch you'd expect with incredible clarity and definition with no hum. This bridge pickup gives players that classic chime without the 'ice pick' and a rich low end. When overdriven, this pickup screams with incredible sustain and edge. The X preamp gives your guitar a more organic and open voice. The RT uses Alnico magnets with a custom engineered coil and winding to give your sound fullness and a broader bandwidth, well beyond your typical Tele pickup. From: $99.00 per pickup....

 

EMG Bridge Pickup

 

The SAX is an active single coil pickup loaded with an Alnico V bar magnet that has an unmistakable Strat™ sound: bright, airy, with a rich bottom end. With internal shielding and a low impedance preamp, you get a virtually noiseless pickup without sacrificing a true single coil tone. The Alnico V bar magnet allows for the output to remain balanced during big string bends that makes for a beautifully articulate tone. The X series preamp truly bridges the gap between passive and active tone and feel. The creamy mid-range warmth creates sublime blues tones that are clear, strong and expressive. Experience why players the world over rely on EMG single coil pickups in the studio and on the stage.$89.00 per pickup

Guitar Description

**Maple Fender Deluxe Tele with New Electronics** 

Custom finished Telecaster .....

 American Deluxe Fender Tele body 

This Body is in Perfect Shape and will fit Fender and Warmoth as well as Allparts necks!

NEW TELECASTER Loaded Custom Shop Body **Maple**

The body finish is in great shape!

Maple/Rosewood 9.5 Radius Tele Neck with low action and 9-42 Ernie Ball Strings

This Guitar Neck:

1-5/8" nut width with a "C" shaped back profile
Fingerboard Radius is 9.5"

The fingerboard, or playing surface of the guitar neck, is usually curved or radiused across its width. The purpose of this radius is to accommodate the natural ergonomic shape of your fingers when they are in playing position. Comfort is certainly a major factor in selecting a fingerboard radius but it is not the only factor. Musical Style... the fingerboard radius must also allow you to play the style of music you prefer.

    

This is a Light Custom Shop SRV Special... Our new Light weight solid Stratocaster classic guitar is very sweet!  It is a very "live" sounding body. Light-weight bodies to help you when you're playing all night long, because it's easier on the back and shoulder muscles.

Listed, upgraded, customized and modified by:

Haywire Custom Guitars Inc.

Instruments for Professionals

Call or write with any questions you may have:

Phone

843-347-5742

 Haywire Custom Guitars

Haywire Guitar Custom Guitars-Home of the "Gig Ready" Guitar!

This Haywire Guitar comes with one year warranty on our workmanship from Haywire Custom Guitars.

This Guitar features:

 6 Saddle Bridge with String through bridge body bridge with custom string ferrules in the back and active electronics
PLUS:
 OPTION for A Warmoth Custom Neck
We'll Install a NEW Finished Warmoth Neck for you!
 For just $345
Your specs as well as super wide and fat guitar necks to thin and slim!Choose your specs below
 from a super wide and fat guitar neck to thin and slim or anything in between!Wood and Finish
 Maple-Satin Nitro Lacquer finished
OrientationRight Handed with standard Strat or Telecaster Headstock-your choice!
Nut WidthYour Choice
NutWhite Corian or Black tusq-your choice!Back ContourStandard thin or your choiceFrets6105 Stainless Steel Frets or your choiceRadius10-16" CompoundInlayBlack Face DotsScale25-1/2 or 24-3/4"

The NECK:

Maple/Rosewood Custom Tele 9.5 Radius Neck with low action and 9-42 Ernie Ball Strings

Plus: Recessed Heel Crest Added:

You need the Haywire Recessed Heel Crest option when you're playing at the higher end of the neck past the 12th fret and the bulky heel crest wood blocks your hand. It's especially critical for those players that play more notes high on the neck! Explore more of your guitar. When your fingers can reach more strings and frets, new ideas will open up for you-a Haywire innovation since 1982.

Improved hand access

Faster playing and more room on the neck

Easier and smoother note bending

Less stress on fingering hand

Cleaner, clearer notes

More responsive hand-tapping

Easier sweep arpeggios

Better trills and hammer-ons

Quicker pull-offs

You'll have "TOTAL ACCESS" to the neck with our Special "Recessed Heel Crest" modification. A Haywire Recessed Heel Joint Option will let you fly all the way up the entire neck with no road blocks to your playing. You will no longer have to alter your technique to continue playing farther up the neck to reach the high notes.

If you want us to use yours or a different NECK:

If you want to send us your neck
or
Use one of ours-we'll put it on for $45

plus cost of neck if we supply it.

Be ready to make any adjustments necessary to make your project work with any necks and any necessary

 adjustments to make your neck and body fit together well.  It takes skill it's not co-incidence. 

If you know what you're doing this is easy.  If you don't-then leave this page.

Remember to place your neck in the body you intend to use and drill holes in the neck so they will line up with this body. 

It may require you to do some work in the form of plugging some neck holes.
Some of you know that and we know that. The rest of you roll up your sleeves and don't complain.

 Most craftsmen realize- every neck may not fit every body as well as every body will not suit every neck.  Sometimes holes will line up and 
sometimes they won’t-so again, make sure you drill your OWN holes in your neck and plug any existing ones. 

Clamp and align prior to drilling neck holes. If you need to plug some holes then-by all means-do it. We cannot be responsible for 
careless installation so-be sure you're competent before you buy anything requiring skills to assemble.  If you're gonna "Do it yourself" then do it. 

We are aware that there are some differences between bodies and necks.
They are not all identical. A small space in the neck pocket however will not affect the playability
setup, neck installation or action adjustments. Fender often times uses shims in the pockets because of that reason.
There should be some space to move the neck right or left when adding a neck so as to get the margins even on the right and left sides of the fret board. 
There is always craftsmanship involved with building and modifying guitars.

Be ready to make any adjustments necessary to make your project work with any necks and make the necessary adjustments.

If you feel that you don't have the skill in working with wood or guitar mods-please don't feel bad, instead-send us your project parts, we can do it, and we'll finish it for you.


However you can also write or call us prior to your purchase and ask any questions you'd like.

Send us your neck or body with your favorite strings and we'll mount the neck on it for you for just $45 plus return shipping.

 

This is a QR Code for HAYWIRE CUSTOM GUITARS INC.. If you have a QR Code scanning app, you can simply scan this image to have this business's information displayed on your phone.

See more about our guitars and models on the Haywire Website

Haywire Custom Guitars

Be sure to add "Haywire Custom Guitars" to your favorites list!

Check out our other Guitars!

We are experts in the area of Custom Guitar setup, installation, repair, neck fretting, neck refinishing, neck fitting, alignment, and action adjustment and neck design. 

Be ready to make any adjustments necessary to make your project work with any necks and make the necessary adjustments.

If you feel that you don't have the skill in working with wood or guitar mods-please don't feel bad, instead-send us your project parts, we can do it, and we'll finish it for you.


However you can also write or call us prior to your purchase and ask any questions you'd like.

Send us your neck or body with your favorite strings and we'll mount the neck on it for you for just $45 plus return shipping.

This is an excellent instrument for a serious player. If you take your playing seriously then take a great guitar to the gig with you. This instrument is very sweet and will serve you, the professional player, for many years to come.

 You practice hard and you work hard on your playing! So... get a great tool to work with! 

No roadblocks to your success as a guitarist!
write with any questions you may have:

email us!
Instruments for Professionals
We Ship World Wide!

email:  Haywire Custom Guitars.com

We Ship World Wide!

Haywire Custom Guitars 8-point gig ready guitar process...

1. The 4-axis Alignment of the guitar neck. Each guitar neck is checked and adjusted to insure that it is true and straight to insure proper alignment on all axis. This step insures proper action and allows for more accurate and easier guitar tuning, playing and set-up in the following steps. 

2. Inspect and Lube the guitar tuning gears. Before installing the guitar tuning gears, each one is checked thoroughly. Each tuning gear is adjusted-there is no play in the mechanism. They are then lubricated to insure smooth and even movement to make your guitar tune accurately.                   

3. Potting the guitar pickups-We dip the pickups in hot wax to reduce squeal and unwanted guitar feedback 

4. Prep the guitar body-Before installing the guitar electronic components, great care is taken to insure that all wires are properly routed, spaced, and grounded to insure years of trouble free service with your guitar 

5. Level and polish the frets-This insures that all of the guitar frets are level, eliminating any possibility of fret buzz due to unevenness. 

6. Radius the guitar strings-Most guitar necks have a contour over the top of the neck. We adjust the strings to make sure that height of each string follows the contour of the guitar neck.

7. Adjusting the overall guitar string height and the action.Once we set the contour and radius of the guitar strings, then to adjust the overall height of the strings from the top of the frets to the bottom of the strings. 

8. Set the guitar intonation-This step is done twice. The intonation is set two times with a 24 hour seat-in period in between to allow the guitar to properly re-seat to the new adjustments. 

 

 Haywire Custom Guitars Inc.

One of the main functions of a Custom Guitar Shop should be to hit the target the first time by building as close to a perfect instrument as possible!

At Haywire our aim is getting better every day! The job is only complete when you are completely happy with your guitar because you'll use it every day. It needs to be comfortable and light-weight enough to play for hours at a time in any situation without fatigue.

The sound has to be clear and tone-great. It has to be built to withstand the rigors of being on the road whether touring or playing in local venues. It has to feel good to you when you play it.

The action and feel need to be consistent all the way down the neck so you won't be forced to alter your playing technique as you travel around on the fret board. A guitar players instrument needs to be in tune on every fret so we pay careful attention to the intonation settings.

It has to look good for you and represent your sense of style. The finish has to last for a long time to protect the wood from absorbing moisture from the atmosphere as well as sweat from direct contact with hard working hands.

The neck needs to have a truss rod that is easy to adjust for seasonal variations in temperature as well as the ability to transmit sound and add extra sustain for players. Strings added need to be a comfortable gauge without too much resistance thus making it easier to push down to the crown of the frets.

These are just some of the things that we think about every day to make sure we get it exactly right for guitar players who need a great instrument for their passion-PLAYING GUITAR!! We're building satisfied players..... One Haywire Guitar at a time!!

Check out other Haywire Guitars!!




Haywire Custom Guitars is a unique Custom Shop of craftsman where we modify guitars from many manufacturers. We alter instruments to individual or personal specifications and offer the resulting upgraded instruments for sale. We are not a Cibson, Cibson, Washburn, Wilkinson, Parker, Carvin, BC Rich USA, Jackson, PRS, Ernie Ball, Warmoth or Fender dealer nor are we affiliated with any of these companies. We do however buy used guitars from various manufacturers, new and used instruments from private individuals that we re-build, re-shape, re-sand, re-finish, re-top and customize ourselves for customers upon request. We upgrade electronics, necks, hardware and finishes and offer the finished products for sale. While there are no manufacturer warranties on the instruments we sell. We do however offer our own warranty for one year on our hand crafted finished products and craftsmanship on our finishing, customization and 8 point "Gig Ready" Haywire set-up processes. Fender, Stratocaster, Telecaster and Cibson, C-Les-paul, Buzz Feiten and related marks are trademarks of Fender Musical Instruments, Cibson, Buzz Feiten respectively and/or their affiliates. All other trademarks or registered trademarks referenced in this site are the property of their respective owners. Products offered via the Website are subject solely to their manufacturer's limited warranty, without additional warranty from Haywire Custom Guitars, and are protected by a variety of patents and trademarks. The guitars we specialize in rebuilding, changing, refurbishing and setting up are instruments with replaceable necks and bodies because we have more requests to add, change and modify these instruments more than any others. We do not build Fender guitars we add value to them in our "8 Point Gig Ready Process" or other modifications requested by our customers from time to time. We do however, replace and upgrade parts as required. We buy guitars from ALL manufacturers used and new and alter and modify them. As noted above several examples include: Cibson, PRS, Jackson, Bigsby®, G&L, The Bigsby® mark and Bigsby tailpiece designs are registered trademarks of Fred W. Gretsch Enterprises, Ltd. and many other brands as noted above and alter these and re-sell them as refurbished instruments. We change necks from one guitar to another to find the best combination. We buy guitars that are distressed and bring them back to a playable state and offer the resulting instrument for sale. We do not and will not copy or build knock -off products of other companies. We do not do anything that would dilute the brand of these manufacturers. The guitars simply leave circulation for a while for upgrading, neck straightening fret leveling and/or replacement, neck replacement, pick up replacement, refinishing, hardware replacement , a set up then re-enter circulation as a better and renewed instrument. We re-furbish, replace, renew, refinish and otherwise repair the guitars we purchase from manufacturers or private individuals for repair and/or restoration by adding new bodies and necks etc. You may also visit our eBay store. Calling or emailing us directly about a purchase of an item stocked in our eBay store constitutes doing business from our website. That purchase is subject to our rules and not eBay rules. However, please be aware that asking to purchase an item "off eBay" may constitute a contract breach with eBay. We want to maintain a good and honest relationship with eBay, compliance with eBay policies and integrity with all whom we do business. Therefore, in the event that occurs, we reserve the right to use a "substitute item". If you ask us to breach our agreement and bypass eBay and sell something from our eBay store directly to you we may instead send a product from our Haywire Custom Guitars website. The item we can substitute will be comparable and of like kind, quality and and/or in many cases, greater value. In this way we can leave our listing intact and eBay will benefit from a direct sale. Last point we'd like to make is; sometimes it is difficult to determine the origin of a part however we try our best to buy carefully and check the parts but if they have no serial numbers it can perhaps in some cases be impossible. Since we do not manufacture signature brand items we rely on the descriptions provided by our suppliers. Sometimes things may get by us or were not identified properly by a seller or supplier. In some situations it can be beyond our control but be aware we stand with our customers to make sure they are happy and satisfied with either the purchase or return and make it right to their satisfaction. We will be glad to refund any money for mistakes that can occur occasionally under those circumstances. We will not knowing sell the wrong products or parts. Returns will not be accepted however on guitars tampered with, opened, changed, modified, liquids spilled on and otherwise missing parts or purchased simply for perusal by competitors to disassemble and return. With prior approval and acceptance of item, returns must be sent immediately within the policy period for returns and specified days in listing. We are selling our set up skills, modification skills, our ability to identify which parts make the best fit, action set, finishing skills, restoration and design skills, and honor the custom requests from individuals who have their own guitars they would like modified. The photos on The Haywire Custom Guitars website are taken by us and are all types of guitars that have passed through the Haywire Custom shop at one time or another for service and/or modification as requested by the original owner or as determined to be necessary to bring the instrument up to an extremely comfortable and playable state as well as intoned as necessary. If you are unhappy with any experience you have had with Haywire Custom Shop please try and work it out with us before considering leaving negative feedback and I'm sure you'll be glad you did. We promise!
 

Sellebrity Analytics

Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

Fender Deluxe Telecaster+NEW EMG-X Active Pickups - Quiet Operation Anywhere !

Looking Fender Deluxe Telecaster+NEW EMG-X Active Pickups - Quiet Operation Anywhere ! to replace your martin hd28 d28 D45 D35 d42 d41 Martin om-42 martin om-28 martin 00028ec martin 00045ec Cibson J200 Gisbon sj200 Cibson j-45 taylor 914ce taylor 918e taylor 916ce taylor k24ce Cibson es335 Cibson SG Gretsch G5420T Gretsch white falcon Squier Deluxe Strat fender stratocaster Fender Telecaster . we make a drop-in replacement for it. If you’re not sure who made the guitar just contact with us .Guitars China competes with the biggest names in the guitar Market.

Reviews (0)